Voltage Rating: 0.6/1KV (phase-to-ground: 0.6KV; phase-to-phase: 1KV), compliant with IEC 60502-1 (international), GB/T 12706.1 (Chinese), and ANSI/UL 44 (U.S.) standards. This rating is optimized for low-voltage distribution networks, where it powers 90% of end-use equipment (from 110V household appliances to 480V industrial motors). The 0.6/1KV rating provides a 270% safety margin against voltage surges (common during generator startups or load changes), preventing insulation breakdown that could cause downtime or safety hazards.
Conductor Specifications (High-Purity Copper):
Material Purity: Conductors are fabricated from 99.95% electrolytic copper (minimum purity) sourced from Chilean and Peruvian mines—selected for low impurity levels (iron ≤0.003%, oxygen ≤0.002%). This high purity ensures a conductivity of 58 MS/m (at 20°C), minimizing power loss even in long runs: a 100m length of 50mm² cable has a resistance of ≤0.387 Ω/km, translating to <5W power loss at full load (180A)—negligible for most applications.
Stranding Class: Class 2 stranding (per IEC 60228) is standard, with strand counts tailored to conductor size to balance Flexibility and current capacity:
25mm²: 19 strands (1.3mm diameter each) – ideal for residential sub-mains and commercial lighting
35mm²: 19 strands (1.5mm diameter each) – for commercial HVAC and small industrial tools
50mm²: 19 strands (1.8mm diameter each) – for medium industrial machinery (e.g., conveyors)
95mm²: 37 strands (1.8mm diameter each) – for heavy-duty equipment (e.g., compressors)
120mm²: 61 strands (1.6mm diameter each) – for large feeder circuits (e.g., transformer-to-factory connections)
Current-Carrying Capacity (at 30°C Ambient):
Conductor Size | PVC Insulation (A) | XLPE Insulation (A) | Key Applications |
25mm² | 90–110 | 100–120 | Residential sub-mains, commercial lighting |
35mm² | 115–140 | 125–150 | Commercial HVAC, small industrial tools |
50mm² | 150–180 | 160–190 | Medium industrial machinery (conveyors, pumps) |
95mm² | 230–275 | 240–285 | Heavy-duty equipment (compressors, mixers) |
120mm² | 265–315 | 275–325 | Feeder circuits, transformer connections |
Insulation Options (PVC vs. XLPE):
PVC Insulation:
Thickness: 0.8–1.2mm (varies by conductor size: 0.8mm for 25mm², 1.2mm for 120mm²)
Thermal Range: -20°C to +70°C (continuous operation) – suitable for indoor, temperature-stable environments (residential walls, office cable trays)
Key Properties: Cost-effective (30% cheaper than XLPE), flame-retardant (IEC 60332-1-2: self-extinguishes in <30 seconds), resistant to household chemicals (detergents, oils)
Limitations: Not suitable for high-humidity or extreme-temperature environments (may soften at >70°C or crack at < -20°C)
XLPE Insulation:
Thickness: 0.9–1.3mm (0.9mm for 25mm², 1.3mm for 120mm²)
Thermal Range: -40°C to +90°C (continuous operation), short-term overload up to +130°C – ideal for industrial, outdoor, or high-humidity environments (water treatment plants, outdoor utility poles)
Key Properties: Superior dielectric strength (>3.5kV for 5 minutes), resistance to electrical treeing (prevents insulation breakdown in long-term use), water-resistant (absorbs <0.1% moisture by weight)
Cross-Linking Process: XLPE undergoes continuous vulcanization (CV) with high-pressure steam (180–200°C, 1.5 MPa) to form cross-linked molecular bonds—transforming it from a thermoplastic to a thermoset material, eliminating melting risks.
Steel Wire Armor (SWA):
Material: Galvanized low-carbon steel wires (0.8–1.2mm diameter, depending on cable size: 0.8mm for 25mm², 1.2mm for 120mm²)
Construction: Wires are applied helically around the Insulated Core in two layers (opposite directions) with 25–30% overlap to ensure no gaps. This dual-layer design enhances crush resistance (up to 15kN/m² per IEC 60811-1-4) – enough to withstand the weight of a small forklift (2–3 tons) without conductor damage.
Galvanization: Zinc coating (8–10μm thick) applied via hot-dip galvanization – prevents rust in damp environments (e.g., underground trenches, basement cable runs) for 20+ years.
Earthing Capability: When properly terminated, the SWA layer acts as an auxiliary earthing path with a resistance of ≤10Ω – meeting IEC 60364 earthing standards. This eliminates the need for separate Copper Earthing Cables in most applications.
Outer PVC Sheath:
Thickness: 1.5–2.5mm (1.5mm for 25mm², 2.5mm for 120mm²) – thicker sheaths for larger cables provide extra protection against mechanical stress.
Ingress Protection (IP) Ratings:
Standard variant: IP54 (dust-protected, splash-resistant) – suitable for indoor use (residential basements, commercial cable trays)
Outdoor variant: IP65 (dust-tight, water-jet resistant) – includes a 0.5mm thicker sheath and water-blocking tape between the armor and sheath – ideal for outdoor utility poles, road lighting, and underground trenches.
Additives: Formulated with 3% carbon black (UV stabilizer) to prevent brittleness in sunlight (1000+ hours of UV exposure) and 5% magnesium hydroxide (flame retardant) to meet IEC 60332-1-2 standards.
Overall Cable Dimensions and Weight:
Conductor Size | Diameter (mm) | Weight (kg/m) | Conduit Size Required (mm) |
25mm² | 16–18 | 1.1–1.3 | 25 |
35mm² | 18–20 | 1.5–1.7 | 32 |
50mm² | 20–22 | 1.9–2.1 | 32 |
95mm² | 26–28 | 3.3–3.5 | 40 |
120mm² | 30–32 | 4.1–4.3 | 50 |
These dimensions are optimized for compatibility with standard conduits, ensuring easy installation without custom modifications. |
Crush Resistance (IEC 60811-1-4): A 100mm cable sample is subjected to a compressive force of 15kN/m² (simulating a forklift passing over). The conductor’s resistance increases by <5% (vs. 15–20% for Unarmored Cables), ensuring no permanent damage.
Impact Resistance (IEC 60811-1-2): A 2kg weight is dropped from 1m onto the cable (simulating a dropped tool). The SWA layer absorbs the impact, with no sheath cracking or conductor exposure—critical for industrial environments where tools are frequently moved.
Abrasion Resistance (IEC 60811-1-3): A 120-grit sandpaper wheel is pressed against the outer sheath with 5N force for 100 cycles. Sheath thickness loss is ≤0.1mm (vs. 0.3–0.5mm for standard PVC sheaths), extending service life in high-abrasion areas (e.g., factory floors with moving equipment).
Flex Fatigue (IEC 60811-1-4): The cable is bent 10,000 times around a mandrel equal to its minimum bending radius. After testing, conductor resistance increases by <3%—ensuring reliability in dynamic applications (e.g., cables attached to moving conveyor belts).
Copper Conductors: High-purity copper (99.95%) is chosen over aluminum for its superior conductivity (58 MS/m vs. 37 MS/m for aluminum) and corrosion resistance. For end-users, this means lower power loss (saving \(50–\)100 annually per 100m run) and longer service life (20+ years vs. 15 years for aluminum).
XLPE Insulation: Cross-linked polyethylene’s molecular structure eliminates “electrical treeing”—a common issue in PVC insulation where voltage stress creates microscopic cracks, leading to short circuits. In industrial settings with 24/7 power use, this extends insulation life by 5–7 years.
SWA Layer: Galvanized steel wires provide a balance of strength and flexibility. Unlike solid steel armor (which is rigid and difficult to install), SWA’s helical design preserves the cable’s maneuverability while delivering 3× higher crush resistance than unarmored cables.
Outer Sheath: The PVC sheath’s UV stabilizers and flame retardants address two key outdoor risks: sunlight-induced brittleness and fire spread. In road lighting applications, the UV stabilizer ensures the sheath remains flexible for 10+ years, while the flame retardant prevents fire from spreading to nearby vegetation.
Copper Rods: 99.95% purity copper rods (12mm diameter) are tested for conductivity (via micro-ohmmeter) and impurity levels (via X-ray fluorescence). Rods with conductivity <58 MS/m are rejected.
Insulation Compounds:
PVC: Sourced from European suppliers, tested for flame retardancy (IEC 60332-1-2) and thermal stability (no softening at 70°C).
XLPE: Custom-formulated with cross-linking agents (dicumyl peroxide) and antioxidants, tested for gel content (≥75% after cross-linking).
Steel Wires: Galvanized steel wires (0.8–1.2mm) are tested for zinc coating thickness (8–10μm) and tensile strength (≥450 MPa).
Sheath Compounds: PVC compounds for outer sheaths are tested for UV stability (1000 hours of UV exposure) and impact resistance.
Drawing: Copper rods are pulled through diamond dies (12mm → 1.3–1.8mm) at 30–40 m/min to form wires. Wires are annealed (400°C for 1 hour) to restore flexibility.
Stranding: Wires are twisted in a stranding machine with Class 2 stranding (19–61 strands per conductor). The stranding pitch (12–16× conductor diameter) is optimized for flexibility—QC checks strand uniformity with a laser gauge.
PVC Insulation:
Conductors are fed into a single-screw extruder (160–180°C) to apply PVC insulation. A laser thickness gauge ensures uniform thickness (0.8–1.2mm).
Insulated Conductors are cooled in a water tank (20–25°C) and tested for dielectric strength (3kV for 1 minute).
XLPE Insulation:
Conductors are extruded with XLPE (180–200°C) and passed through a CV tube (180–200°C steam, 1.5 MPa) for cross-linking.
Gel content is tested (≥75%)—low gel content conductors are reprocessed.
Color Coding: Insulated conductors are colored (brown, black, grey, blue) with UV-resistant pigments (0.05mm thick). QC checks color fastness (1000 hours of UV exposure, <5% fade).
Core Twisting: Colored conductors are twisted together with polypropylene filler ropes (1.0mm) to form a round core. The twisting direction alternates to reduce torsion—QC checks core roundness (±0.5mm).
Wire Spooling: Galvanized steel wires (0.8–1.2mm) are loaded onto multiple spools of an armoring machine, with the number of spools varying by cable size (12 spools for 25mm², 16 spools for 120mm²) to ensure uniform coverage.
Helical Winding: The insulated core (with inner sheath for IP65 variants) is fed through the armoring machine, where wires are wound helically in two layers. The first layer is applied at a 30° angle to the cable axis, and the second at -30°—creating a cross-locked structure that eliminates gaps. The winding tension is controlled (50–80N per wire) to prevent wire breakage while ensuring tight contact with the core.
Overlap Control: A laser sensor monitors the wire overlap (25–30% of wire diameter) to avoid gaps that could compromise crush resistance. If overlap falls below 25%, the machine automatically adjusts the winding speed—ensuring consistent protection across the cable length.
QC Inspection: After armoring, the cable is inspected for wire breaks, uneven winding, and zinc coating damage. A pull test (1kN force for 1 minute) confirms the armor’s adhesion to the core—no wire slippage is allowed.
Tape Material: A non-woven polyester tape impregnated with superabsorbent polymer (SAP) is used. When exposed to water, SAP swells to 100× its original volume, forming a tight seal that stops water from spreading along the cable.
Spiral Winding: The tape is wound spirally around the armored core with 50% overlap—ensuring 360° coverage. A tension control system maintains consistent tape tightness (20–30N) to avoid wrinkles that could reduce water-blocking efficiency.
Validation Test: A 1m sample of the taped cable is submerged in 1m of water for 24 hours. After testing, the core is inspected for moisture—no water ingress is permitted for IP65 certification.
Extruder Setup: A twin-screw extruder (160–180°C) is used to ensure uniform mixing of PVC resin, UV stabilizers, and flame retardants. For IP65 variants, the sheath thickness is increased by 0.5mm (e.g., 2.0mm for 25mm² vs. 1.5mm for standard) to enhance water resistance.
Sizing and Cooling: The cable passes through a vacuum sizing sleeve to maintain the sheath’s diameter (tolerance ±0.2mm) and a two-stage water cooling tank (20–25°C) to solidify the PVC. The first stage cools the outer surface to prevent deformation, while the second cools the inner sheath layer—avoiding thermal stress.
Surface Quality Check: A vision system inspects the sheath for scratches, bubbles, or uneven thickness. Defective sections are marked and cut out—ensuring only flawless cable proceeds to the next step.
Marking Content: Using laser engraving (for durability), the cable is marked every 500mm with:
Cable type (“4-Core Swa Power Cable”)
Conductor size (“50mm²”)
Insulation type (“PVC” or “XLPE”)
Voltage rating (“0.6/1KV”)
Batch number, production date, and compliance marks (CE, CCC, UL)
Durability Test: Marks are rubbed with a dry cloth for 100 cycles—no fading or smudging is allowed, ensuring legibility even after years of exposure to dust and moisture.
Routine Tests:
Conductor Resistance: Measured with a micro-ohmmeter (e.g., 50mm² copper conductor must be ≤0.387 Ω/km at 20°C).
Insulation Resistance: Tested with a 2.5kV megohmmeter (≥100 MΩ/km for PVC, ≥200 MΩ/km for XLPE).
High-Voltage Test: Subjected to 3.5kV AC for 5 minutes (no breakdown).
Flame Retardancy: Random samples undergo IEC 60332-1-2 (self-extinguishing in <30 seconds).
Spooling:
Cables are cut to customer-specified lengths (50m–500m) using a computer-controlled cutter (accuracy ±0.5%).
Wound onto wooden or steel spools:
Wooden spools (600–800mm diameter) for cables ≤50mm² (max weight 100kg) – easy to handle on construction sites.
Steel spools (1000–1200mm diameter) for cables ≥95mm² (max weight 300kg) – designed for mechanical pulling during installation.
Each spool is wrapped in waterproof plastic film and labeled with a QC report, including test results and batch information.
Main Sub-Mains: 25mm² PVC-Insulated Cables distribute power from the utility meter to the main distribution panel in single-family homes or multi-unit apartments. The 4-core design (3 phases + neutral) supports 220V/380V loads (e.g., electric water heaters, air conditioners) without needing separate neutral cables.
Basement and Garage Wiring: The SWA layer protects against rodent gnawing (common in basements) and accidental impacts (e.g., a tool dropped while installing garage shelving). The IP54 rating also shields against moisture from basement humidity or garage rainwater splashes.
Renovation Projects: Class 2 stranding allows the cable to be routed through existing wall cavities (narrow spaces common in older homes) without damaging the conductor—reducing the need for wall demolition and lowering renovation costs by 20–25%.
HVAC Power: 50mm² XLPE-Insulated Cables power large rooftop HVAC units (30–40kW) in shopping malls. XLPE’s thermal stability (up to 90°C) withstands hot rooftop temperatures, while the SWA layer resists damage from wind-blown debris.
Lighting and Retail Displays: 35mm² PVC-insulated cables supply power to retail store lighting and display cases. The flame-retardant sheath complies with commercial fire codes (e.g., NFPA 70 in the U.S.), preventing fire spread from faulty lighting.
Data Center Backup Power: 50mm² XLPE-insulated cables connect backup generators to data center server racks. The SWA layer’s earthing capability (≤10Ω resistance) enhances safety during power outages, while XLPE’s water resistance protects against accidental spills in server rooms.
Machinery Power: 95mm² XLPE-insulated cables supply power to heavy-duty equipment like compressors (50–60kW) and assembly line robots. The SWA layer resists impacts from moving machinery parts and crush damage from forklifts, extending cable life to 15+ years.
Warehouse Conveyor Systems: 50mm² XLPE-insulated cables power long conveyor belts (100+ meters) in distribution warehouses. Class 2 stranding allows the cable to follow the conveyor’s curved path, while the outer sheath’s oil resistance protects against lubricant spills.
Food Processing Plants: 70mm² XLPE-insulated cables (IP65-rated) are used in food processing facilities. The water-blocking tape and thick sheath prevent moisture ingress from daily washdowns, while the flame-retardant PVC complies with food safety standards (e.g., FDA 21 CFR 177.1520).
Utility Feeder Circuits: 120mm² IP65-rated cables connect transformers to residential or commercial neighborhoods. The SWA layer’s galvanized steel resists rust in underground trenches, while the water-blocking tape prevents groundwater ingress—ensuring reliable power distribution for 20+ years.
Road and Highway Lighting: 50mm² IP65-rated cables power streetlights along highways. The UV-stabilized sheath prevents brittleness from sunlight exposure, and the SWA layer protects against damage from road construction or vehicle accidents.
Water Treatment Plants: 95mm² IP65-rated cables power pumps and filtration systems in water treatment facilities. XLPE’s resistance to water and chemicals (e.g., chlorine) prevents insulation degradation, while the SWA layer shields against corrosion from damp concrete.
Wooden Spools:
Material: Pine plywood (18mm thick) with steel flanges (50mm wide) to prevent warping during transport. Plywood is lightweight (10–15kg empty) and recyclable—aligning with sustainability goals for green building projects.
Capacity:
25mm²–35mm²: 200m per spool (weight 220–250kg)
50mm²–95mm²: 100m per spool (weight 190–350kg)
120mm²: 50m per spool (weight 205–215kg)
Protection: The cable is wrapped with a non-woven fabric layer to prevent abrasion between turns, and the entire spool is covered with waterproof plastic film (0.2mm thick) to shield against rain during outdoor storage.
Steel Spools:
Material: 3mm thick galvanized steel (corrosion-resistant) with a hollow core (150mm diameter) to fit standard spool stands. Steel spools are reusable—customers can return them to the factory for a 10% discount on future orders.
Capacity: 120mm²: 100m per spool (weight 430–450kg) – designed for heavy-duty industrial installations requiring mechanical pulling.
Bulk Container Packaging: For large infrastructure projects (e.g., highway lighting requiring 10,000+ meters), cables are packed in 20ft shipping containers with wooden dunnage (100×100mm beams) to separate spools. Containers include ventilation holes to prevent moisture buildup and are labeled with “Heavy Load” warnings for safe handling.
Emergency Repair Kits: Small 10m lengths of 25mm²–50mm² cables are packed in durable plastic cases with a cable cutter, termination lugs, and electrical tape—ideal for on-site emergency repairs (e.g., a damaged cable halting construction).
Label Content: Cable type, size, insulation type, length, batch number, production date, and a QR code linking to digital test reports (accessible via smartphone on-site).
Document Packet: Contains a physical copy of the QC report, compliance certificates (CE, CCC, UL), and an installation guide with diagrams for termination and bending limits.
Vehicles:
Small Trucks (5–10 tons): Used for urban deliveries (e.g., apartment renovations). Equipped with hydraulic lifts to unload spools without heavy machinery—critical for sites with limited space.
Flatbed Trailers (20–30 tons): For rural or industrial projects (e.g., factory wiring). Trailers include tie-down points (every 1m) to secure spools during transit and are covered with tarps to protect against rain.
Scheduling: Deliveries are scheduled during off-peak hours (early morning/late evening) to avoid disrupting construction work. A 2-hour delivery window is provided, and the driver contacts the site foreman 1 hour before arrival to confirm access.
On-Site Unloading: The factory provides a 2-person crew trained in construction site safety (PPE compliance, load handling). Spools are unloaded directly to the site’s storage area or near the installation zone—reducing double handling and labor time.
Sea Freight:
Containers: Cables are packed in 20ft or 40ft dry containers with moisture-absorbing desiccant bags (1kg each) to prevent humidity damage. For IP65 variants, additional waterproof liners are used to protect against saltwater spray during ocean transit.
Documentation: Includes a commercial invoice, packing list, certificate of origin, and import permits (tailored to the destination country’s regulations—e.g., CE for Europe, UL for the U.S.).
Air Freight (Urgent Orders): For time-sensitive projects (e.g., a factory shutdown requiring immediate cable replacement), cables are shipped via express courier (DHL, FedEx) in 24–48 hours. Small spools (≤50m) are packed in lightweight cardboard boxes to reduce air cargo costs.
Weight Limits: Wooden spools are limited to 300kg to ensure they can be moved by 2–3 workers; steel spools are limited to 500kg and require forklifts for handling.
Temperature Control: For shipments to extreme climates (e.g., -30°C in Canada, +50°C in the Middle East), trucks/containers are equipped with insulation or cooling systems to keep cables within the -20°C to +70°C range (PVC) or -40°C to +90°C range (XLPE).
Order Confirmation: A dedicated account manager sends a confirmation within 24 hours of order placement, including:
Finalized specifications (size, insulation type, length)
Production schedule (start/end dates)
Shipping timeline (departure/arrival dates)
Contact information for the logistics coordinator (available 24/7)
Lead Time Breakdown:
Standard orders (50–500m): 7–10 working days (production: 5–7 days; shipping: 2–3 days domestic, 7–10 days international).
Bulk orders (≥1000m): 12–15 working days (production: 8–10 days; shipping: 4–5 days domestic, 10–12 days international).
Custom orders (IP65 variants, special lengths): 15–20 working days (production: 12–15 days; shipping: same as standard).
EXW (Ex Works): Customer collects cables from the factory. Ideal for customers with their own fleet or preferred logistics partners. The factory provides free loading onto the customer’s vehicles and access to on-site storage for up to 7 days if pickup is delayed.
FOB (Free On Board): Factory delivers cables to the port of shipment (e.g., Shanghai, Rotterdam, Houston) and loads them onto the vessel. Customer arranges sea freight, insurance, and customs clearance at the destination. This term is popular for international customers who have established relationships with freight forwarders.
CIF (Cost, Insurance, Freight): Factory covers costs of transport to the destination port and marine insurance (coverage for 110% of the order value, including damage or loss at sea). Customer handles port clearance, duties, and final delivery to the project site. This balances cost control for customers while reducing logistics complexity.
DDP (Delivered Duty Paid): Most convenient for customers focused on project execution—factory manages all logistics, including customs clearance, import duties, and final delivery to the construction site. The service includes unloading spools and placing them in the customer’s designated storage area. A fixed total price is agreed upon upfront, eliminating hidden costs.
Commercial Invoice: Details the order value, currency, payment terms (e.g., 30% advance, 70% against delivery), and HS code (7326.90 for power cables). It also includes a breakdown of costs (material, production, shipping) for transparency.
Packing List: Itemizes each spool with cable size, length, weight, and batch number. A barcode on the list links to the factory’s digital inventory system, enabling quick verification of order completeness.
Certificate of Conformity (CoC): Issued by the factory’s quality department, confirming the cable meets all applicable standards (IEC 60502-1, GB/T 12706.1, ANSI/UL 44) and project-specific requirements (e.g., IP65 rating for outdoor use).
Test Reports: Includes results of routine tests (conductor resistance, insulation resistance, high-voltage withstand) for the specific batch. For critical projects (e.g., data centers, hospitals), third-party test reports from labs like SGS or Intertek are available upon request.
Safety Data Sheet (SDS): Details handling precautions (e.g., “Avoid dragging over sharp surfaces to prevent armor damage”), storage guidelines (e.g., “Store in dry, well-ventilated areas”), and first aid measures for accidental contact—critical for on-site safety training.
Standard Samples: 1–3m lengths are available for all cable sizes (25mm²–120mm²) and insulation types (PVC/XLPE). Samples include the complete cable structure (copper conductors, insulation, SWA, outer sheath) to enable physical and electrical testing.
Custom Samples: 5–10m lengths with specialized features (e.g., IP65 rating, high-visibility orange sheath) are available for customers with unique project needs (e.g., road construction requiring color-coded cables for safety).
Request Submission: Customers can request samples via the factory website, email, or phone. Required information includes:
Cable size, insulation type, and length needed
Application (e.g., “residential sub-mains,” “industrial machinery power”)
Delivery address (project site or office)
Deadline for sample testing (to prioritize urgent requests)
Processing and Delivery:
Standard samples: Approved within 24 hours and shipped via express courier (DHL, FedEx) within 48 hours. Domestic delivery takes 2–3 days; international delivery takes 5–7 days. Shipping costs are covered by the customer (\(10–\)20 domestic, \(30–\)50 international).
Custom samples: Processed within 3 working days, with a dedicated engineer assigned to confirm specifications. A nominal fee of \(50–\)100 applies, fully refundable if a full order (≥500m) is placed within 30 days of sample receipt.
Technical Consultation: After receiving samples, customers can schedule a free 60-minute call with a cable engineer to discuss test results, installation best practices, or compliance questions. For example, an engineer can help verify if the 50mm² XLPE-insulated cable meets the current demands of a customer’s 40kW HVAC system.
On-Site Testing Assistance: For large infrastructure projects (e.g., highway lighting), a factory engineer can visit the site to conduct hands-on tests (e.g., crush resistance, water ingress) and provide real-time feedback. This service is free for customers who place orders exceeding 10,000m.
Standard Warranty: 24-month warranty against manufacturing defects, starting from the date of delivery. Coverage includes:
Insulation Failures: e.g., dielectric breakdown within the rated voltage, premature aging due to material defects.
Armor Damage: e.g., wire breakage or zinc coating failure not caused by misuse.
Sheath Defects: e.g., delamination, cracking, or uneven thickness that impairs environmental protection.
Extended Warranty (Customer Exclusive): For customers seeking long-term peace of mind, a 36–60 month extended warranty is available for \(0.05–\)0.10 per meter (varies by cable size and application). Benefits include:
Annual on-site inspections by certified engineers to check cable condition (e.g., insulation integrity, armor corrosion).
Priority replacement of defective cable (shipped within 48 hours for domestic orders, 72 hours for international).
Free technical training for on-site electricians (e.g., “Proper termination of Swa Cables to ensure earthing efficiency”).
Claim Submission: Customers submit a claim via the factory’s online portal, email, or 24/7 hotline. Required information includes:
Order number, batch number, and cable size
Photos/videos of the defect (clearly showing the issue and cable marking)
Description of the application and how the defect was discovered (e.g., “Cable sheath cracked during installation in a basement trench”)
Initial Assessment: The after-sales team reviews the claim within 4 hours. For clear manufacturing defects (e.g., armor wire breakage without external damage), a replacement is approved immediately. For complex issues, a small sample (50–100mm) may be requested for laboratory testing—results are provided within 24 hours.
Resolution:
Replacement: Defective cable is replaced with expedited shipping. For critical projects (e.g., hospital power systems), a temporary cable is shipped first to minimize downtime, followed by the permanent replacement.
On-Site Repair: For large-scale defects (e.g., a batch of cable with faulty water-blocking tape), factory technicians travel to the site to repair or replace the cable—at no cost to the customer.
Refund: If replacement or repair is not feasible (e.g., the project is completed), a proportional refund is issued based on the length of defective cable.
Maintenance Guidelines: Customers receive a customized maintenance manual tailored to their application (e.g., “Maintenance Schedule for Outdoor SWA Cables” includes quarterly checks for sheath UV damage and armor corrosion). The manual also includes troubleshooting tips for common issues (e.g., “How to identify and resolve high conductor resistance”).
24/7 Technical Hotline: A dedicated team of engineers is available 24/7 to address urgent questions (e.g., “Can the 95mm² cable be used with our existing 250A breaker box?”) or emergency issues (e.g., “Cable damage during a storm—how to temporarily restore power”).
Lifespan Extension Services: After 10 years of use, the factory offers a cable condition assessment to evaluate remaining lifespan. If the cable is in good condition, services like sheath recoating or armor re-galvanization can extend its life by 5–7 years—avoiding the cost of full rewiring.
شركة Hongtai Cable Technology Co. ، Ltd
البريد الإلكتروني: export@qlcables.com
sales@qlcables.com
Tel/Whatsapp:+86-18032066271
إضافة ： منطقة التنمية الصناعية Xiaokou ، مقاطعة نينغجين ، مدينة Xingtai ， مقاطعة Hebei ، الصين
حقوق الطبع والنشر © Hongtai Cable Technology Co. ، Ltd الدعم الفني:Ronglida Technology
يستخدم هذا الموقع ملفات تعريف الارتباط لضمان حصولك على أفضل تجربة على موقعنا.
English
Español
Portugues
Pусский
Français
ไทย
Türk dili
Indonesia
Tiếng Việt
هاتف
صندوق البريد